Fitting the LPG tank

Fitting the LPG tank to the underneath of the Iveco box, wasnt straight forward, a little bit of cutting and rewelding had to be done before the frame could be bottled up to the bow chassis.

1st photo
Frame clamped in place so that we could see where to drill the fixation holes



2nd Photo
frame re-drilled and fixation holding plates cut off and re-welded to the appropriate place to fit the chassis rails and then that "yuk" red oxide primer paint



3rd photo
"Voila" the tank is solidly in place bolted at both ends and 4 bolts along the sides
a good solid job with the straps to finish off.